Tabla de contenido
Idiomas disponibles
Idiomas disponibles
12V Cordless Drill
SYMBOLS
For your easy reference, here are the tools symbols you may see on your
tool label:
CHARGER PROCEDURE
To reduce the risk of injury, user must read and understand
instruction manual.
RECHARGING BATTERIES
A) CHARGING THE BATTERY
The Li-ion battery is protected against
deep discharging. When the battery is
empty, the machine is switched off by
means of a protective circuit: The chuck
no longer rotates.
In a warm environment or after heavy use, the battery pack may become
too hot. Allow time for battery to cool down before recharging. [SEE A]
B)IMPORTANT NOTES CHARGING THE BATTERY [SEE A]
a. Connect the power cord of the charger with a wall socket. The charger
LED turn green.
b. Slide the battery as far as it will go into the charger, by inserting the
battery terminal into the suitable opening of the charger.
c. The charging LED turn red to show the charge starting,
d. when start charging, the three green intelligent battery indicators will
illuminate in turn when the capacity reach 30-40%, two indicators will
illuminate in turn when the capacity reach70-80%,one indicator will
keep ashing when 100% fully charged ,three lights will illuminate
together. After a few minutes, the indicators will off.
e. After about 1 hour the battery will be fully charged the charging LED
will turn to green. Unplug the charger plug from the socket .
AFTER SALES SUPPORT
1800 505 8311
USA
Symbols & Charging & Operation
LCD670-1S-1200
USA
ETL APPROVED
3083182
Indoor use only
DO NOT BURN
DO NOT DISPOSE
WITH HOUSEHOLD
WASTE
A
8
Capítulos
Tabla de contenido
