Battery Use And Care - Workzone 44217 Manual Del Usuario

12V Cordless Drill
Power tool use and care
1) Do not force the power tool. Use the correct power tool for your applica
tion. The correct power tool will do the job better and safer at the rate for
which it was designed.
2) Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and
must be repaired.
3) Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustment, changing accessories or
storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
4) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained
users.
5) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power
tool's operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
6) Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
7) Use the power tool, accessories and tool bits etc. In accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation
Battery tool use and care
1) Endure the switch is in the off position before inserting battery pack.
Inserting the battery pack into power tools that have the switch on invites
accidents.
2) Recharger only with the charger speci ed by the manufacturer. A charger
that is suitable for one type of battery may create a risk of re when used
with another battery pack.
3) Use power tools only with speci cally designated battery packs. Use of
any other battery packs may create a risk of injury and re.
4) When battery pack is not in use, keep it away from other metal objects
like paper clips, coins, keys, nails, screws or other small metal object,
that can make a connection from one terminal to another. Shorting the
battery terminals together may cause burns or a re.
AFTER SALES SUPPORT
1800 505 8311
USA
Electrical Safety
[email protected]
USA
6