AEG SCT51800S0 Manual De Instrucciones página 15

A
4 mm
44 mm
Drill the hinge cover A, as shown in figure.
Apply the covers A and A1 (in the acces-
sories bag) in to the middle hinge.
A1
Install the appliance in the niche.
Push the appliance in the direction of the
arrow (1) until the upper gap cover stops
against the kitchen furniture.
Push the appliance in the direction of the
2
arrow (2) against the cupboard on the op-
posite side of the hinge.
1
Adjust the appliance in the niche.
Make sure that the distance between the
appliance and the cupboard front-edge is
44 mm.
The lower hinge cover (in the accessories
bag) makes sure that the distance be-
tween the appliance and the kitchen furni-
ture is correct.
Make sure that the clearance between the
appliance and the cupboard is 4 mm.
Open the door. Put the lower hinge cover
in position.
ENGLISH
15