Booster Function - BORETTI BIK-97 Manual De Uso

• Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [00] and a sound rings
and the heating zone stops.
To stop the sound and the blinking it is enough to press the key [T-] or [T+].

Booster function

The booster function [P] grants a boost of power to the selected heating zone. If this function
is activated the heating zones works during 10 minutes with an ultra high power. The booster is
foreseen for example to heat up rapidely big quantities of water, like nuddles cooking.
• Start up / Stop the booster function:
Action
Start up the booster
Zone selection
Stop the booster
• Power management:
The hole cooking hob is equipped by a maximum of power. When the booster function is activated,
and not to exceed the maximum power, the electronic system orders to reduce automatically the
power level of an other heating zone. The display is blinking on [9] during a few seconds and then
shows the maximum of power allowed ( [6] or [8] ).
Heating zone selected
[P] is displayed
Pause function
This function brakes all the hob's cooking activity and allows restarting with the same settings.
• Start up / Stop the pause function:
Action
Engage pause
Stop the pause
Function «keep warm»
This function of maintenance to the heat makes it possible to reach and maintain automatically
a temperature of 70°C.
This will avoid liquids over spillage and the food to attach at the bottom of the pan.
Control panel
press key [P]
press key [+]
press key [-]
from the boosted heating zone
or press key [P]
press key [+] or [-]
from the desiredheating zone
The other heating zone:
[9] goes to
Control panel
Press key [II]
Press key [II]
and press any key [+] or [-]
Display
[P] control light is blinking
[P]
[9]
[P] control light is blinking
last power level
(example: power level 9)
[6] or [8] depending the type of zone
Display
Displays [II] in the 4 heating zone display
Pause control light is blinking.
NL
FR
ES
EN
51