Connecting The Speakers; Connect To The Fm Antenna; Connecting Auxiliary Equipment - Hitachi AXM549BT Manual De Instrucciones

Connecting the Speakers

Connect the speaker cords between the terminals as shown below.
Connect the cable with a black head to the (-) terminals and cable with a red head to the (+)
terminals.

Connect to the FM Antenna

1. Connect the supplied FM Antenna to the FM
Antenna socket on the rear of the unit.
Caution:
To avoid noise, keep antennas away from the system, the connecting cord and the AC power
cord.

Connecting Auxiliary Equipment

Connect the AUX Input terminals on the rear of the unit to the line output terminals on the auxil-
iary equipment with an audio cable (not supplied) illustrated below.
2. If reception is poor, connect the outside
antenna.
Note: Before attaching a 75 ohm coaxial lead
(the kind with a round wire going to an
outside antenna), disconnect the
supplied FM wire antenna.
GB-14