UFESA CF4809N Instrucciones De Uso página 6

Warning! Surfaces may be damaged.
Do NOT use abrasive cleaning agents.
• Wipe the appliance and attached parts with a
damp cloth and then a dry cloth.
Cleaning the circular blade
Thoroughly clean the circular blade always
immediately after use and only by hand.
Fold up the table and take out of the hinge to
the right (Fig. 9). Rotate the blade holder in a
clockwise direction, place vertically and take out
the circular blade (Fig. 6).
When re-attaching the blade, ensure that it is
locked correctly in position = blade holder in
horizontal position.
Risk of injury from falling blade!
Complete cleaning
Fig. 11
Remove the stop plate. To do this, turn the knob
beyond the 0 position to ►and remove the stop
plate.
To insert the stop plate, the knob must be
on ►!
To insert, press the stop plate directly in the
middle and turn the knob back to 0. Check by
adjusting the cutting width. If the appliance does
not function, remove the stop plate again and
repeat the process.
The appliance is maintenance-free.
ADVICE ON DISPOSAL:
Our goods come in optimized packaging.
This basically
non-contaminating materials which should be
handed over to the local waste disposal service
as secondary raw materials.
Before throwing a used appliance away, you
should first make it noticeably inoperable and be
certain to dispose of it in accordance with current
national laws. Your Retailer, Town Hall or Local
Council can give you detailed information about
this.
This appliance is labeled in accordance
with European Directive 2002/96/EC –
concerning
electronic appliances (waste electrical
and electronic equipment – WEEE). The guideline
determines the framework for the return and
recycling of used appliances as applicable
throughout the EU. Please ask your dealer about
current means of disposal.
consists in using
used electrical and