How To Connect The 4-Channel Scope Module - Tecnotest 3790 Manual Operativo

_______________________________________________________________ 4-CHANNEL SCOPE MODULE
1.0 -

HOW TO CONNECT THE 4-CHANNEL SCOPE MODULE

ATTENTION:
Switch off the power to the REFLEX PLUS before removing or installing the
4-CHANNEL SCOPE MODULE. Failure to do so may cause internal damage
that is not covered by warranty.
To connect the 4-CHANNEL SCOPE MODULE:
•
Pull the two locks (4) outward, insert the gas module connector (2) in the
REFLEX PLUS hardware extension socket (1) and push the two locks (4) until the
4-CHANNEL SCOPE MODULE is hooked up to the REFLEX PLUS.
OPERATING INSTRUCTIONS 19