Safety Notes - Chauvet Professional Well Flex QRG Guía De Referencia Rápida

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

WELL™ Flex QRG
About This Guide
Disclaimer

Safety Notes

Contact
What Is
Included
The WELL™ Flex Quick Reference Guide (QRG) has basic product information
such as connection, mounting, menu options, and DMX values. Download the
User Manual from
www.chauvetprofessional.com
The information and specifications contained in this QRG are subject to change
without notice.
·
DO NOT open this product. It contains no user-serviceable parts.
·
DO NOT look at the light source when the product is on.
·
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
·
CAUTION: When transferring product from extreme temperature
environments, (e.g. cold truck to warm humid ballroom) condensation may
form on the internal electronics of the product. To avoid causing a failure,
allow product to fully acclimate to the surrounding environment before
connecting it to power.
·
CAUTION: This product's housing may be hot when lights are operating.
·
Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
·
DO NOT leave any flammable material within 50 cm of this product while
operating or connected to power.
·
USE a safety cable when mounting this product overhead.
·
DO NOT submerge this product (IP44). Temporary outdoor operation is fine.
·
DO NOT operate this product if the housing, lenses, or cables appear
damaged.
·
DO NOT connect this product to a dimmer or rheostat.
·
ONLY connect this product to a grounded and protected circuit.
·
ONLY use the hanging/mounting bracket or the handle to carry this product.
Do not carry by the moving head.
·
In the event of a serious operating problem, stop using immediately.
·
The maximum ambient temperature is 113 °F (45 °C). Do not operate this
product at higher temperatures.
To maintain the IP 44 rating, you must use the included rubber plug to cover
the power adapter on the base of the WELL™ Flex.
·
From outside the U.S., UK, Ireland, Mexico, or Benelux, contact the
distributor of record to request support or return a product.
·
From inside the U.S., UK, Ireland, Mexico, or Benelux, use the information in
Contact Us
at the end of this QRG.
·
WELL™ Flex
(Six-pack road case or single product)
·
Neutrik® powerCON® power cord
·
Omega bracket with mounting hardware
(for each product)
·
·
·
2
for more details.
Rubber plug (for each product)
Warranty Card
Quick Reference Guide
EN
Tabla de contenido
loading

Este manual también es adecuado para:

Well flex grrWell flex mrWell flex bh

Tabla de contenido