Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PRODUCT SPECIFICATIONS
PressureWasher Specifications
Max Outlet Pressure ..............
1700 [email protected] GPM*
Max Flow Rate ...................
1000 [email protected]*
Detergent Mix .................
See MFR's Instructions
Water Supply Temperature....
Not to exceed IO0°F (38°C)
Motor ........................
Universal (brush) Type
Rated Voltage ..........................
120 Volts AC
Current .................................
12.5 Amps
* This pressure washer is rated in accordanceto the
Pressure Washer Manufacturers Association (PWMA)
standard PW101-2010 (Testing and Rating Performance of
Pressure Washers).
OWNER'SRESPONSIBILITIES
GeneralRecommendations
Regular maintenancewill improve the performance and
extend the life of the pressure washer.
The pressure washer warranty does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, the operator must maintain
pressure washer as instructed in this manual including
proper storage as detailed in Storage.
Before EachUse
1. Cleandebris.
2. Check water inlet screen for debris or damage.
3. Check high pressure hose for leaks.
4. Check spray gun operation.
PRESSURE WASHERMAINTENANCE
Clean Debris
Daily or before use, clean accumulated debris from electric
pressure washer, inspect cooling air slots and openings on
the front, rear and bottom of the electric pressure washer.
These openings must be kept clean and unobstructed.
The electric pressure washer parts should be kept clean to
reduce the risk of overheating and ignition of accumulated
debris.
*
Use a damp cloth to wipe exterior surfaces clean.
NOTICE Improper treatment of the electric pressure washer
can damage it and/or shorten its life.
*
DO NOT insert any objects through cooling slots.
Checkand Clean Water inlet Screen
Removewater inlet coupling (A). Then remove water inlet
screen (B) from the unit's water inlet (C) using a needle nose
pliers. Water inlet is located on left side from front of unit.
Examinewater inlet screen, if the screen is dirty, clean with a
small brush and water, if the screen is damaged, replace it.
11
Tabla de contenido
