Important Safety Instructions - Viking DrawerMicro VMOD5240 Guia De Instalacion

IMPORTANT–Please Read and Follow!
• Before beginning, read these instructions thoroughly
and carefully.
• Because the kit includes metal parts, caution should
be used in handling and installation to avoid the pos-
sibility of injury.
• Do not remove permanently affixed labels, warnings or
plates from the product as this may void the warranty.
• Observe all local and national codes, requirements
and ordinances.
• Installers should leave these instructions with the con-
sumer who should retain them for the local inspector's
use and for future reference.
• For SAFETY CONSIDERATIONS do not install drawer
in any combustible cabinetry, which is not in accord
with the stated clearances and dimensions on page
4, See figure 1.
ELECTRICAL GROUNDING INSTRUCTIONS
This oven must be electrically grounded in
accordance with local codes or, in the absence
of local codes, with the National Electrical Code,
ANSI/NFPA 70 – latest edition.
DO NOT USE AN EXTENSION CORD WITH THIS
APPLIANCE. SUCH USE MAY RESULT IN FIRE,
ELECTRICAL SHOCK OR OTHER PERSONAL
INJURY.
IMPORTANT SAFETY
INSTRUCTIONS
• WARNING: If the information in this manual is not
followed exactly, a fire or electrical shock may result
that could cause property damage, personal injury
or death.
• WARNING: To reduce the risk of tipping, the Drawer-
Micro Oven must be secured by a properly installed
Anti-Tip block.
• This appliance must be electrically grounded in ac-
cordance with local codes.
• Make sure the wall coverings and the cabinets around
the DrawerMicro Oven can withstand the heat gener-
ated by the appliance.
• WARNING: Never leave children alone or unattended
in the area where a appliance is in use. Never leave
the drawer open when the microwave is unattended.
• WARNING: Stepping, leaning or sitting on the drawer
may result in serious injuries and can also cause dam-
age to the appliance.
• Do not use the DrawerMicro Oven as a storage
space. This creates a potentially hazardous situation.
• Check that the time-of-day is in the display. If not,
touch Stop/Clear to prevent unintended use.
E2