SAFETY DEVICES
Although the appliance is complete with all safety
devices, during installation and connection addi-
tional devices must be added if necessary to com-
ply with the relevant legal requirements.
The illustration shows the position of the devices.
A)Gas supply tap: for turning the connection to the
gas supply line on and off.
B)Safety thermocouple: cuts out the gas supply if the
flame goes out.
C)Spacers: ensure optimal combustion conditions pre-
venting the use of 2/1 food containers.
Important
Do not remove the spacers on
supporting grill (C).
SAFETY AND INFORMATION SIGNS
The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
data.
B)Burn hazard: watch out for hot surfaces.
C)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
D)General hazard: read the manual carefully be-
fore carrying out any procedure.
E)General hazard: all relevant regulations must be
complied with. "Install in compliance with the rel-
evant regulations and use in well ventilated
premises only".
F) General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of
failure to comply with the installation and com-
missioning instructions".
G)CE marking: this indicates that the equipment is
compliant with all relevant laws applicable to the
product.
OPTIONAL ACCESSORIES
The appliance can be equipped with the following
accessories on request ("see general catalogue").
B
burner
Caution - warning
Make a daily check that the safety devices are
properly installed and in good working order.
B
- 5 -
C
A
F
E
A
IDM-39603611500.tif
C
D
IT
GB
G
DE
FR
IDM-39614500500.tif
ES
English