Kongskilde MultiEvacuator Instrucciones De Servicio página 29

Conveying capacity
Conveying capacity depends on the
piping layout and the material being
conveyed. The capacities shown in
the examples below apply to plastic
granulate with a volume weight of
650 kg/m .
3
The tables show conveying capaci-
ties for different standard types of
Suction system
OK160 suction line with "short" intake nozzle and
two 90 bends.
o
kg/h
*without filter **with filter (700 Pa/1800 m
Suction/pressure system
OK160 suction line with "short" intake nozzle and
two 90 bends. OK160 pressure line with two 90°
o
bends and an outlet cyclone.
kg/h
suction and suction/pressure sys-
tems. For suction systems, figures
are also given for capacity with and
without filter on the blower outlet.
Each table gives the conveying ca-
pacity for different lengths of piping.
The conveying system is the total
length of all horizontal and vertical
piping on both suction and pressure
Multievacuator
type:
200*
200**
175*
175**
140*
140**
120*
120**
Conveyor
length [m]
/h)
3
Multievacuator
type:
200
175
140
Conveyor
length [m]
sides. A length of suction hose is
included, but bends and intake noz-
zle are not.
Since many factors are involved,
the conveying capacities given
must be taken as indicative only.
Suction system
OK160 suction line with vertical "round" intake nozzle, 2.5 m
polyurethane hose and two 90
kg/h
*without filter **with filter (700 Pa/1800 m
With OK100 piping the capacity will be 60-70% of the values stated above.
Suction/pressure system
OK160 suction line with vertical "round" intake nozzle and
2.5 m polyurethane hose. OK160 pressure line with two 90°
bends and an outlet cyclone.
kg/h
With OK100 piping the capacity will be 60-70% of the values stated above.
bends.
o
Multievacuator
type:
200*
200**
175*
175**
140*
140**
Conveyor
length [m]
/h)
3
Multievacuator
type:
200
175
140
Conveyor
length [m]
29