Extras - Elinchrom ELB 1200 Manual De Funcionamiento

User Manual
When the photocell is on, the flash unit will trigger at any recognised flash impulse.
The pre-flash option can be adjusted manually if the number of pre-flashes of the speedlight is
known.
MANUAL PRE-FLASH SETUP
In some cases depending on the technology of the speedlite unit, the automatic pre-flash
EN
detection may not work. In this case you can try a manual setup.
• Preflash cnt : set up the number of pre-flashes from 1 to 20 and add the main flash.
• Time frame : set the time window in which all pre-flashes, including the main flash, are fired
• Block time: set the delay between each pre-flash from 0.5 to 5 ms.
Note: we cannot suggest any values or setting here; this depends on the speedlite unit and must
be tested until the correct synchronisation between the flash unit and the speedlite is achieved.

EXTRAS

The settings in "Extras" help you define standby and when to auto-off to save energy.
The audio options give you the choice of different settings for ready, error and keytones.
The volume of the ready, error and key tones can be adjusted, enabling you to work silently
if necessary. The ready tone can be chosen to improve acoustical recognition of when all
flashes have fired and recycled.
Extras
16
DISPLAY
Auto std-by
Auto - off
Ready tone
Ready volume
Error volume
Keyboard click
(ONLY EXPERIENCED USERS)
OPTION
off / 1 min – 60 min
off / 1 min – 60 min
Tone 1 to 12
Off/min/low/default/high/max
SETTINGS