General Operations Within The Viot™Suite - Interacoustics Viot Manual De Instrucciones

General operations within the Viot™Suite
The following operations are available within the Viot™ Suite:
8. Go to current session button brings you back to the current session.
9. The Report editor button opens a separate window for adding notes to the current session. Remember
that when saving the session this report is also saved to OtoAccess®. In the current version it means that after saving no changes to this report can be made.
10. The Viot™ Suite allows 2 types of recording, capturing images and capturing video. The currently
selected mode is highlighted blue or red, depending on the chosen ear.
11. A white checkmark indicates that (at least some) captures are stored in memory.
12. The Capture (and Stop) button allows you to capture a picture and starting/stopping a video recording.
Viot™ - Instructions for Use - EN
1. Menu to go to Print, View, Edit, Setup or Help, Print. The menu has
the following structure:
Menu | Print | Print ... to print the current protocol using the
•
default template as it is set up in the Viot™ 440 setup. You will
enter the print window from where you can select your printer
and change settings before printing. Note that you are
prompted to select a template if in the Viot™440 no template is
selected.
Menu | Print | Print preview... to see the print preview using
•
the print template as it is set up in the Viot™440 setup. Note
that you are prompted to select a template if in the Viot™440 no
template is selected
Menu | Print | Print layout... to open the print wizard window
•
from where you can select a template to print the current
protocol. See paragraph 5.1 5.1for operating the print wizard.
Menu | View | Save window position stores the current size
•
and positioning of the Viot™ Suite. Next time the suite is
opened it will default to saved size and position.
Menu | Edit | Export to file allows you to export the currently
•
selected picture to a BMP, JPEG, TIFF or PNG file
Menu | Edit | Export to MSPaint allows you to export the
•
currently selected picture as a BMP file directly into MSPaint
Menu | Setup | Viot™440 setup opens the main setup window
•
in which you
o define the location where recorded videos are stored
enter the print setup from which the default print template
o
is selected
Menu | Help | About ... brings you to an informative window
•
which shows the following information:
Version of Viot™ Suite
o
Copyright Interacoustics 2009
o
o Website link to
2. Print button to print current viewed protocol directly to your default
printer. Note that you are prompted to select a print template if it is not
yet defined in the Viot™440 setup.
3. Save & New Session icon to save current measurements to
OtoAccess® or Noah and start a new session with all included tests
ready for testing.
4. Save & Exit button to save current measurements to OtoAccess® or
Noah, close the Viot™ Suite and go back to OtoAccess® or Noah.
5. Change Ear button to change from left to right ear and vice versa.
6. Select camera live view to swap from seeing the currently selected
picture or video to the live view from the video otoscope.
7. Historic session drop down menu where earlier stored
measurements can be chosen for reviewing.
www.interacoustics.com
Page 13