How To Use The Product; Normal Menu - Televes FI Simple Manual De Instrucciones

01030075_000:103422.QXD 22/07/2009
User manual
5. - USING THE PRODUCT
Insert the programmer into the "PRGM" pro-
gramming connector of the FI DVBS2 PRO-
CESSOR at the front of the unit.
When you connect the unit to the control, it
will send you its configuration parameters
(memorized channel, configuration, output
level, SW version,...). During this process
the SW version of the programmer will
appear on the screen during a moment, the
screen will appear in the following way:
PCT firmware
version
------------
V:4.05
Then, the SW version of the processor will
appear on the screen also during a moment:
Unit
firmware
version
V:2.01
11:24 Página 42
5.1.- MAIN MENU
Finally the first configuration menu of the
unit will appear. This menu is used to acti-
vate/deactivate each processor (3 proces-
sors in case of 586401 o only one in case of
586301) and also to select the LNG supply
voltage.
CONFIG
P1: onP2: on
P3: on
LNB:00V
Ref. 586401
If you press the key repeatedly, you will
access the selection (flickering) of the confi-
guration option
deactivate(off) each processor: P1, P2, P3.
Once you find the processor on which you
want to act (this is marked by a fickering
effect on the on/off option of the correspon-
ding processor), choose between on and off
using the and keys.
After the on/off selection of P3, you will also
access the LNB power supply mode and the
selection of 22 Khz tone by pressing the
key .
42
There are 5 possible options (you can select
them using the
select the LNB supply voltage and the gene-
ration or not of 22KHz tone, power supply
that goes to the LNB through the signal
input connector of the FI DVBS2 PROCES-
SOR module to select band and polarity:
CONFIG
PR: on
LNB:00V
LNB not supplied, without tone
LNB:00V
(no band or polarity selected)
Ref. 586301
LNB:13V22KHz
LNB supplied at 13 V, tone activated
(vertical polarity, high band)
to activate(on)/
LNB:13V
LNB supplied at 13 V, tone deactivated
(vertical polarity, low band)
LNB:17V22KHz
LNB supplied at 17 V, tone activated
(vertical polarity, low band)
LNB:17V
LNB supplied at 17 V, tone deactivated
(vertical polarity, low band)
IF Processor
and
keys) that allow to