Idiomas disponibles
Idiomas disponibles
PG 50
Eliminación del electrodoméstico viejo.
En base a la Norma europea 2002/96/CE de Residuos de aparatos Eléctricos y Electrónicos (RAEE),
los electrodomésticos viejos no pueden ser arrojados en los contenedores municipales habituales;
tienen que ser recogidos selectivamente para optimizar la recuperación y reciclado de los
componentes y materiales que los constituyen, y reducir el impacto en la salud humana y el
medioambiente. El símbolo del cubo de basura tachado se marca sobre todos los productos para recordar
al consumidor la obligación de separarlos para la recogida selectiva.
El consumidor debe contactar con la autoridad local o con el vendedor para informarse en relación a la
correcta eliminación de su electrodoméstico viejo.
DECLARACIÓN DE CONFORMIDAD: Este dispositivo cumple con los requisitos de la Directiva de Baja
Tensión 2014/35/EU y los requisitos de la directiva de Compatibilidad Electromagnética 2014/30/EU.
Please read the following instructions carefully before connecting the timer to electrical appliances.
IMPORTANT
- Do not plug a device if it exceeds 16 Amp.
- Always make sure the device is properly connected to the device.
- If you need to clear the timer, unplug it from the mains and wipe with a dry cloth.
- Do not immerse the timer in water or other liquid.
- Radiators and the like should not be left unattended while running. The manufacturer does not
recommend connecting such devices to the timer.
- This timer plug allows control turn on/off of the device which is plugged in it, by countdown/count-up.
Description
A. Switch of count mode (countdown to turn off;
countup to turn on).
B. Indicator LED light of working.
C. ON/OFF Touch button
D. Timer switch (30 minutes, 1, 3 and 6 hours).
E. Grounding plug to connect desired appliance.
Instruction of operation
- COUNT DOWN MODE: select countdown mode in A switch on rear side. Set desired time on D switch.
Press C touch button, light B will light and plugged appliance will work, while timer of programmer starts
to run. Programmer will switch off the current when it reaches set time on D switch, the plugged
appliance will turn off. Press touch button C at any time of programming to turn off the programmer.
- COUNT UP MODE: select countup mode in A switch on rear side. Set desired time on D switch. Press C
touch button, light B will light and blink and count time start running. Programmer will switch on the
current when it reaches set time on D switch, the plugged appliance will turn on. Press touch button C at
any time of programming to turn off the programmer.
DIGITAL TIMER PLUG – PG 50
INSTRUCTION MANUAL
ENGLISH
3
