FALMEC QUASAR Manual De Instrucciones página 23

Step 3
- To avoid hood unhooking due to underneath pressure, fix it to the wall with a screw anchor
and related screw, by using the appropriate holes at the back of the hood or the cope flasks.
Step 4 (optional)
- Place element (G) onto the chimney until is fully inserted.
- Fix the extension (H) to element (G), sliding it to the desired height.
- Once having found the optimum position, rest the bracket (L) against the wall, check the hori-
zontal alignment using a spirit level and mark the 2 holes to be drilled at the ends.
- Drill the holes, insert 2 x 4mm dia. screw anchors and fasten the bracket (L) using the corre-
sponding screws.
- Tighten the extension (H) to the bracket (L) using the screws (M).
21