Premier ED-5018 Manual De Instrucciones página 21

6. Leafy vegetables and the stalks can also be juiced.
7. The juice shall be drunk immediately after juicing. If the juice is exposed in the air for quite a long
time, it will change its flavor and lose nutritive value.
Do not use the juice for juicing for especially hard fruits and vegetables with multi-fiber, such as cane
and stale vegetables, for fear of damaging blades or obstruction in fruit juice collector resulting from
excessive fiber and shutting down and burnout of motor caused by overload.
Cleaning
Do not use alcohol, gasoline, acetone or abrasive cleaning agents to clean the product.
It will be easier to be cleaned immediately after use.
1. Cut off the power supply of the juicer. Unplug the plug from the socket and wait for total shutting down
of filter.
2. Remove the dirty parts from motor components. Remove the juicer according to the following
sequence:
Remove the marc barrel → Pull down the push bar (please pull down the push bar towards the
direction of juice outlet) → Remove the transparent cover
3. Remove the juice collector together with the filter.
4. Clean these parts with cleaning brush and then wash them in tap-water.
5. The transparent part will be dyed after fruits or vegetables with high pigment content are processed.
To avoid such situation, please soak the transparent parts in water with 10% lemon juice. Then cleans
with brush and detergent.
Notice: Do not immerge the main engine in water, nor wash under the tap.
The juicer shall be dried by airing or being wiped after cleaning and be kept in a dry place.
The chapter summaries the majority of problems you may encounter in the process of use. You may
read each relevant chapter for details.
Problems
The juicer is out of work
When first using the device, the motor device will
produce terrible smell.
The juicer is too noisy
Not ideal effect of juice with a little juice or
excessive thickness
P-4
Types of Failures and Trouble-shooting
Solutions
The juicer has safety device. If the components
are not appropriately installed, it will not work.
Please cut off the power supply of the juicer first
and check whether the components are correctly
installed (especially whether the pull bar is in
place)
It is not an abnormal phenomenon. If the product
still produces smell like this after several times of
use, please check its processing amount and
processing time.
Reinstall the filter screen. Please turn clockwise,
For several circles after correct placing of it and
check
whether it is laid flat or you may reduces its
working time. Maybe there is too much marc in the
filter screen, which causes obstruction. Please cut
off the power first and reuse it after cleaning.