Premier ED-5018 Manual De Instrucciones página 20

11. When the juicer is running, do not put finger or other objects into the feeding tube. The only object
allowed to be put into is the push bar.
12. When the juicer is running, do not take out the marc barrel.
13. Do not touch the small blades on the bottom of it since they are of extreme sharpness.
14. Be sure to unplug the plug of the product after use.
15. When juicing, pressing down the fruit forcibly is forbidden. Drive the push bar according to the
method of lifting-pressing- lifting-pressing.
16. Please switch on the button first and put in fruit after the machine is under running condition.
Preparation for Use
1. Wash all separable components (push bar, transparent cover, filter screen, fruit juice collector, juice
cup and marc barrel)
2. Pull out the electric wire from electric wire storeroom at the back of juicer and plug it in.
3. Put the fruit juice collector into the juicer, then put the filter screen into fruit juice collector, turn
clockwise and press gently to ensure the filter screen installed in place on drive shaft.
4. Put the transparent cover in place from top to bottom and lock the pull bar.
5. Put the fruit juice cup under the juice outlet and place the marc barrel on the other side.
Use of the Product
Only after all components are correctly installed, the cover is accurately locked and the pull bar is
pushed up, can the juicer work normally.
1. Switch on the power and then set the speed button on 1 (low speed) or (2) high speed (Please be
sure to switch on the button and put the fruit in after the machine is running).
a) Speed 1 is applicable to soft fruits and vegetables, e.g. watermelon, grapes, tomatoes, cucumbers
and strawberries.
b) Speed 2 is applicable to all fruits and vegetables.
2. For stepless speed adusting product,the low speed section is applicable to soft fruits and
vegetables,while the fast speed section is applicable to crush other fruits and vegetables.
3.After putting in fruit, gently drive the push bar with the method of pressing- lifting-pressing-lifting- from
top to bottom.
4. Do not use too great force to press the push bar as it may result in running down of the filter screen
and heating of the motor.
5. Do not put finger or other objects into the feeding tube. After completing processing of all fruits, cut off
the power supply when there is no more juice flows out and wash after removing components only when
the filter totally shuts down. Then take off for washing.
Tips
1. Use fresh fruits and vegetables since they contain more juice.
2. It is unnecessary to shuck or shell in advance for ordinary fruits and vegetables (such as apple and
carrot).
3. Fruits with thick shuck, e.g. citrus, pineapple and raw beet, need to be shucked beforehand.(the
juicing rate is directly related with operation method. To slow the propelling speed of fruits may enhance
juicing effect.)
4. When juicing apple juice, the thickness of fruit juice depends on the type of the apple. The more fruit
juice the apple contains, the thinner the fruit juice juiced. The apple juice will soon turn yellow. If it
needs to slow down the speed of turning yellow, you may drip a few drops of lemon juice.
5. The juicer is not applicable for juicing of Fruits containing asylum such as banana, papaya, fig and
mango. You can utilize fruit processing machine and mixer to process them.
P-3