Main Unit Description - PNI CT36 Manual De Usuario

EN
TECHNICAL DETAILS / SPECIFICATIONS
- Main unit power supply: 2 AAA batteries
- REceiver power supply: 230VAC 50 / 60Hz
- Receiver unit command type: NO / NC relay (normally open /) dry contact (not energized)
- Relay operating parameters: maximum 250 V, maximum 10 Amps (resistive), AC / DC current
- Compatible with all Gas heaters with thermostat input compatible with NO relay (dry contact).
- Adjustable / settable temperature range: 5 - 35 ° C (0.5 ° C step)
- Measurable / displayable temperature: 0 - 50 ° C (0.1 ° C step)
- Unit of temperature measurement: only degrees ° Celsius
- Accepted humidity : maximum 85% no condensation in the air
- Screen light: Yes
- Temperature sensor: NTC 10K, 3950ohms at 25 ° C
- Sensor accuracy: ± 0.1 ° C (sensor calibration with 0.5 ° C pitch)
- Degree of protection: IP30
- Housing: ABS with fire standard UL94-5
- WiFi connectivity: 802.11 b / g / n (2.4 GHz); WPA2 password (TKIP and AES)
- RF connectivity between units: 868 MHz
- Smartphone application compatibility: minimum iOS 9 / minimum Android 4.2

MAIN UNIT DESCRIPTION

Weekday
Clock
Set. Temperature
RECEIVER DESCRIPTION
On/O Button
PRG. Button On/O Button
Modes Select
10
Temperature and parameter settings
Code pairing Button
Heating On Indicator ( LED 1)
Power Indicator ( LED 2)
Wireless signal
OWD Icon
Room Temperature
Heating Icon
Programable Period