Craftsman 24LFC14-ETL Manual Del Usuario página 4

IMPORTANT SAFETY INSTRUCTIONS
and perform its intended function. Check for
alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any
other condition that may affect its operation.
A guard or other part that is damaged should
be properly repaired or replaced by an
authorized service center unless indicated
elsewhere in this manual.
■ Make sure all guards, straps, safety guards
and handles are properly and securely
attached.
■ Use only the specified replacement line in
the cutting head. Do not use any other cutting
line, for example, metal wire or rope.
■ Do not install any other cutting head to this
trimmer other than the identical replacement
to the one with which it is originally equipped.
■ Keep guards in place and in working order.
■ Keep blades sharp.
■ Keep hands and feet away from cutting area.
■ Don't grasp the exposed cutting line or
cutting edges when picking up or holding the
appliance.
■ Maintain a firm grip on both handles while
trimming. Keep spool head below waist level.
Never cut with the spool head raised 30 in.
or more above the ground.
■ Store Idle Appliances Indoors – When not
in use, appliances should be stored indoors
in dry, and high or locked-up place – out of
reach of children.
■ Never use blades, flailing devices, wire
or rope. Unit is designed for line trimmer
use only. Use of any other accessories or
attachments will increase the risk of injury.
■ Inspect area to be cut. Remove objects
(rocks, broken glass, nails, wire, string, etc.)
which can be thrown or become entangled in
cutting head.
■ Keep the air vents clean and free of debris
to avoid overheating the motor. Clean after
each use.
■ Stop the unit and disconnect the power
source when not in use. Carry the unit with
the motor stopped.
■ Do not hang unit so that the power switch
is depressed.
■ Battery tools do not have to be plugged into
an electrical outlet; therefore, they are always
in operating condition. Be aware of possible
hazards when not using your battery powered
tool or when changing accessories. Following
this rule will reduce the risk of electric shock,
fire, or serious personal injury.
■ Use only the following model number
battery: 71.98724 (24LB2513)
■ Do not charge either battery in rain, or in
wet locations. Following this rule will reduce
the risk of electric shock.
■ Do not use battery powered tool in rain.
■ Remove or disconnect battery before
servicing, cleaning or removing material from
the battery powered tool.
■ Do not dispose of the battery in a fire. The
cell may explode. Check with local codes for
possible special disposal instructions.
■ Do not open or mutilate the battery.
Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be
toxic if swallowed.
■ Do not place tool or battery near fire or
heat. This will reduce the risk of explosion
and possibly injury.
■ The battery can explode in the presence
of a source of ignition, such as a pilot light.
To reduce the risk of serious personal
injury, never use any cordless product in
the presence of open flame. An exploded
battery can propel debris and chemicals. If
exposed, flush affected bodily area with water
immediately.
■ Do not crush, drop or damage battery packs.
Do not use a battery pack or charger that
has been dropped or received a sharp blow.
A damaged battery is subject to explosion.
Properly dispose of a dropped or damaged
battery immediately.
■ Exercise care in handling the battery in
order not to short the battery with conducting
4 ― English