Installing The Appliance; Wall Mount Installation - Napoleon NEFL50B-HD Manual De Instalación Y Funcionamiento

3.2

installing the appliance

3.2.1 wall mount installation

note:
The wall bracket is fixed on the back of the appliance.
Due to the many different materials used on different walls, it is highly recommended that you consult your
local builder before you install this appliance on the wall.
Select a location that is not prone to moisture and is located at least
A.
3 feet (1m) away from combustible materials such as curtain drapes,
furniture, bedding, paper, etc.
Remove the wall mounting bracket from the appliance by unscrewing B.
the 2 fasteners from the wall mounting bracket as shown, see Figure
2.
Have two people hold the appliance against the wall to determine the
C.
final location.
note:
It is strongly recommended that the mounting bracket be screwed into
the wall studs where possible. If the wall studs cannot be used, ensure
that the supplied plastic anchors are used to affix the bracket to the wall
and the bracket is adequately secured.
Mark out location, then mount the bracket onto the wall using the 5
D.
supplied screws. This bracket MUST have the slots facing upward
and be level.
With the wall mounting bracket installed have two people lift the
E.
appliance up and align the hooks on the back of the appliance with
the slots on the wall bracket, Figure 1.
Secure the appliance to the wall bracket using 2 metal screws, see
F.
Figure 2.
Check the appliance for stability ensuring that the bracket will not pull
G.
free from the wall.
Fig. 1
SLOTS
REAR VIEW
GLASS
SIDE VIEW
BRACKET
SCREWS
SLOTS
REAR VIEW
installation
Fig. 2
X2
A
B
X5
X5
D
W415-1751 / 04.25.17
EN
C
E
9