Main Power Switch And Control Panel; Heater Control; Operating Instructions - Napoleon NEFL50B-HD Manual De Instalación Y Funcionamiento

Once the appliance has been plugged into a grounded electrical outlet, it is ready to operate.
note:
Ensure the house circuit breakers for the power supply are turned on. In the event of a power failure, when the
main power switch of the appliance is in the "I" ("on" position) the appliance will stay off when the power goes
back. You can turn the appliance back on using the power button on the control panel or remote control.
5.1

main power switch and control panel

The main power switch and the control panel are located on the left side of the
appliance as illustrated.
The "|" indicates on and "O" indicates off. Push the switch to "|" to turn
on the appliance.
Remote Control
Remote Control
Power
Power
note:
The timer indicator on the control panel will light up to the
Timer
corresponding setting. It will have a series of different combinations
to show which setting it is on. For example, the 3.5h setting will have
1/2, 1, and 2 light will be on to indicate it is a total of 3.5h
Flame Control
(The flames stay on until power
is turned off. Flame must be on
Power
for the heater to turn on)
Timer

Heater Control

(Flame must be on for the heater
Flame Control
to turn on)
(The flames stay on until power
is turned off. Flame must be on
for the heater to turn on)
Heater Control
(Flame must be on for the heater
to turn on)
1/2h 1h 2h 4h
1/2h 1h 2h 4h
Flame
Heater
Timer
Control
Turns the appliance on/off.
Timer can be programed to run appliance for specific
lengths of time (30 mins. minimum to 7.5 hrs maximum).
Controls flame height and makes the flame dimmer.
Flame
Power Timer
Control
Controls flame height and makes the flame brighter.
Turns the appliance on/off.
Timer can be programed to run appliance for specific
lengths of time (30 mins. minimum to 7.5 hrs maximum).
Turns the heater and blower on/off.
The heater will blow cool air for 10 seconds before the
Controls flame height and makes the flame dimmer.
heat turns on and after it turns off. This prevents the
appliance from overheating.
Controls flame height and makes the flame brighter.
Turns the heater and blower on/off.
The heater will blow cool air for 10 seconds before the
heat turns on and after it turns off. This prevents the
appliance from overheating.

operating instructions

5.0 operating instructions
Indicator
Indicator
Heater
EN
Power
Switch
11
W415-1751 / 04.25.17