Tabla de contenido
Idiomas disponibles
Idiomas disponibles
AP 1500
• The appliance must be supplied at very low voltage
corresponding to that marked on the appliance.
CHARGING THE BATTERIES
After mounting the wall holder:
Insert the AC adapter in a duly installed 230V/50Hz protective contact socket. The charging
•
LED lights up.
•
If you want to charge the batteries, first remove the nozzle attachments and then insert the
•
device first into the upper bracket of the wall mounting.
Then press the handle lightly until the device locks in place.
•
The charging time is approximately 16 hours the first time, and then approximately 8 hours.
•
Once the charging is over, unplug the AC adapter.
•
USING THE DEVICE
Unplug the device and fit on the desired nozzle.
•
In order to start vacuuming you have to press the ON/OFF switch and keep it pressed.
•
Once you have finished or when the batteries are down, connect the vacuum to the charger
•
as described in "Charging the Batteries".
Make sure that the plug is inserted.
•
NOZZLES
Crevice nozzle: ideal for vacuuming corners and crevices, etc.
•
Use for wet vacuuming: Please ensure that you always use the attachment when
•
vacuuming up liquids (insert the extension of the attachment into the device until the nozzle
is flush).
CLEANING
•
Always unplug the device before cleaning!
•
Clean the casing with a dry cloth.
•
The dust container can be released with the release knob and then pulled off from the top
downwards.
•
Remove the dust filter (10) by turning the insert anticlockwise and tapping it out.
•
After emptying the container several times, it can also be cleaned in water. Dry well once you
have finished.
•
Please reassemble the device in the reverse order.
9
Tabla de contenido
