Power Button - Orbegozo AP 4500 Manual De Instrucciones

AP 4500
Floor brush
Crevice tool
Dusting brush
CHARGING
A full charge takes approximately 4.5 hours.
1. To charge the vacuum, remove the rechargeable battery from the bottom of the vacuum.
2. To remove the battery, push the battery lock button in, and pull.
3. Fit the battery onto the charging station.
4. Connect the charging adaptor cable to the charging station, and then plug in at the mains.
5. When the charger is plugged in, both indicator lights on the charging station will illuminate.
6. When the battery is fully charged, the red indicator light will go out.
7. Switch off at the mains and unplug. Remove the charging adaptor for the charging station, and then
remove the battery.
8. Attach the battery to the bottom of the vacuum.
ATTACHING THE TOOLS TO THE MAIN BODY
1. Push the main connector into the suction pipe opening or connect the extension pipe.
2. Push the required tool into the other end of the main connector.
3. When using the extension pipe, ensure the end attachment is fitted securely. When connecting the
extension pipe to the suction pipe, or the floor brush, ensure all tabs are aligned.

POWER BUTTON

1. Once the required accessories have been attached, the vacuum is ready for use.
The floor brush can be attached to either the extension
pipe or the main connector, and can be used to clean
carpets and floors
The crevice tool can be connected to the extension
pipe or the main connector, and can be used to clean
in tight areas, such as corners and under units.
The rechargeable handy vacuum comes with a dusting
brush. The dusting brush can be attached to the main
connector of the extension pipe, and used to clean
window blinds, lampshades, mirrors and other areas
that require delicate cleaning.
10