General Warnings - Riello MINI 11 Manual De Uso

RIELLO MINI

General warnings

Having received the product, check the in-
tegrity and completeness of the supply and
in the event of non-compliance with that
ordered, contact the Agency that sold the
appliance.
The installation
RIELLO MINI boiler must
be performed by a qual-
issue the owner with
the installation decla-
ration of conformity on
completion of the work,
in compliance with the ap-
plicable National and Local Standards and
the instructions supplied by in the instruc-
tion booklet supplied with the appliance.
The RIELLO MINI boiler must be used for
made. The manufacturer accepts no li-
ability within or without the contract for any
damage caused to people, animals and
property due to installation, adjustment
and maintenance errors or to improper
use.
In the event of a water leak, disconnect the
boiler from the main power supply, shut off
the water supply and promptly notify the
Technical Assistance Centre or profes-
Not using the boiler for
an extended period of
time involves the ex-
ecution of at least the
following operations:
Position the appli-
ance's main switch to the
"OFF" position
Set the system's main switch to "off"
turn off the fuel and water taps of the
heating system
Empty the system if there is a risk of
freezing.
of the
Any work or maintenance on the appliance
sional.
The boiler maintenance must be carried
sonnel.
This booklet, along with that for the installer
and the Technical Assistance Centre, are
an integral part of the appliance and must
therefore be kept in a safe place. They
must always be passed on with the boiler if
this is transferred to another owner/user or
to another system. In case of loss or dam-
age, please contact your local Technical
Assistance Service for a new copy.
RIELLO MINI boilers must be equipped
solely with original accessories.
Dispose of all the packaging materials in
the suitable containers at the correspond-
ing collection centres.
Dispose of waste by being careful not to
harm human health and without employing
procedures or methods which may dam-
age the environment.
At the end of its life, the product should be
not be disposed of as solid urban waste,
but rather it should be handed over to a
differentiated waste collection centre.
Before cleaning, disconnect the boiler from
switch and the main control panel switch
to "OFF".
10
-
-