Spare Parts And Pairing Process - Mettler Toledo SPC Manual De Usuario

5 Enter default IP address: 192.168.0.55
ð The IP address of the SPC system can be reset by
pressing the reset button on the electronic unit for
5 seconds.
6 When the connection is established, the device can be
configured and used with APW-Link.

4 Spare parts and pairing process

Weight sensor and electronic unit can be ordered separately as a spare part. In order to make them operable
an external adjustment must be performed.
1 Open the APW-Link software and connect the weighing system, see [Configuring } Page 7].
2 Select Test & Adjustment from the Home Tab.
3 Start the Adjustment process with an external weight and
follow the instructions on the screen.
8