TFA 60.2027.01 Instrucciones De Uso página 9

TFA_No. 60.2027_Anleitung 07.06.2020
Digital alarm clock with LED digits
Thank you for choosing this instrument from TFA.
1. Before you use this product
• Please make sure you read the instruction manual carefully.
• Following and respecting the instructions in your manual will prevent damage to your instru-
ment and loss of your statutory rights arising from defects due to incorrect use.
• We shall not be liable for any damage occurring as a result of non-following of these instruc-
tions.
• Please take particular note of the safety advice!
• Please keep this instruction manual safe for future reference.
2. Delivery contents
• Digital alarm clock
• DC 5V USB cable and power adaptor
• Instruction manual
3. Range of application and all the benefits of your new instrument at a glance
• Display of time or indoor temperature, automatic change is adjustable
• Alarm with snooze function
• LED digits with 3 brightness levels
• Dimming function with automatic timer
16
9:16 Uhr Seite 9
Digital alarm clock with LED digits
4. For your safety
• This product is exclusively intended for the range of application described above. It should only
be used as described within these instructions.
• Unauthorized repairs, alterations or changes to the product are prohibited.
Caution!
Risk of electrocution!
• Connect the device using the USB cable and the supplied power supply to a mains socket
installed within your country's electrical safety regulations and with a correct mains voltage (see
nameplate).
• The mains socket must be located near the equipment and it must be easily accessible.
• Unplug the device immediately if any fault occurs.
• The device and the power adapter must not come into contact with water or moisture. Only suit-
able for indoor use.
• Do not use the device if the housing, the USB cable or the power adaptor are damaged.
• Operate the device out of reach of persons (including children) who cannot fully appreciate the
potential risks of handling electrical equipment.
• Connect the USB cable to the device and the power adaptor first and then plug the power
adapter into the socket.
17