TFA 60.2027.01 Instrucciones De Uso página 10

TFA_No. 60.2027_Anleitung 07.06.2020
Digital alarm clock with LED digits
• Route the USB cable lead so that it does not come into contact with sharp-edged or hot objects.
• Only use the supplied power adapter or connect the device via the USB cable to a suitable USB
power source such as a computer, notebook.
Caution!
Risk of injury!
• Keep this instrument and the batteries out of reach of children.
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed,
this can lead to serious internal burns and death within two hours. If you suspect a battery
could have been swallowed or otherwise caught in the body, seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explo-
sion!
• Low batteries should be changed as soon as possible to prevent damage caused by leaking.
Never use a combination of old and new batteries together, nor batteries of different types.
• Wear chemical-resistant protective gloves and safety glasses when handling leaking batteries.
Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations or shocks.
18
9:16 Uhr Seite 10
Digital alarm clock with LED digits
5. Elements
A: Display (Fig. 1):
A 1: Alarm symbol
A 3: Time/indoor temperature/alarm time
B: Buttons (Fig. 2):
B 1: TIME button
B 3:
SNOOZE sensor button
B 5: – button
B 7: RESET button
C: Housing (Fig. 2):
C 1: Battery compartment
6. Getting started
• The alarm clock can be operated with 3 x 1,5 V AAA batteries (not included). The batteries main-
tain the clock operation in the event of blackout or other power failure. In pure battery opera-
tion, the display is activated for 10 seconds each time a button is pressed. Continuous illumina-
tion of the display only works with USB-/mains connection.
A 2: Snooze symbol
B 2: ALARM button
B 4:
+ button
B 6: ALARM ON/OFF switch
C 2: DC 5V jack
19