Oven Light - Monogram ZEK7500SH3SS Manual Del Propietário

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Oven Light

20
Oven Light Replacement
SHOCK OR BURN HAZARD: Before replacing oven light bulb, disconnect the
WARNING
electrical power to the oven at the main fuse or circuit breaker panel. Failure to
do so may result in electric shock or burn.
BURN HAZARD: The glass cover and bulb should be removed when cool.
CAUTION
Touching hot glass with bare hands or a damp cloth can cause burns.
1. Disconnect power at the main fuse or
circuit breaker panel.
2. Remove oven racks.
3. Slide a flat blade screwdriver between the
housing and the glass light cover.
4. Support the glass light cover with two
fingers to prevent the cover from falling to
the bottom of the oven. Be careful not to
chip the oven coating.
5. Gently twist the screwdriver blade to
loosen the glass light cover.
6. Remove the glass light cover.
Care and Cleaning
Wall Oven
7. Remove the bulb by firmly grasping and
sliding the bulb straight out until the two
prongs have cleared the ceramic holder.
8. Do not touch the glass of the new
replacement bulb with your fingers. It will
cause the bulb to fail when it lights. Grasp
the replacement bulb with a clean towel or
facial tissue with the prongs facing down.
Align the two prongs in the ceramic holder,
pressing gently until the bulb is securely in
the ceramic socket.
9. Slide the protective lens into the holder and
push until the clips snap into the housing.
10. Reconnect power.
49-80821

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Zek7000sh3ss

Tabla de contenido