Technical Features - DIEL MT200 LITE S Manual De Uso

• Box 90x90X115 mm included terminal blocks.
• Front panel 96X96 mm.
• Weight 0,4 Kg.
• Self-extinguishable ABS Box.
• Power supply (24÷240) Volt AC/DC ± 10% 50/60 Hz without polarity
respect.
• Electrical connections with fast connectors.
• Temperature control and mapping with PT100 sensor from -10 °C to
+200 °C.
• System programming directly by frontal panel.
• Possibility to select independently each channel.
• Software configuration to control the environment temperature.
• Input filter for power supply in accordance with
• Precision ± 1% on full scale ± 1 digit.
• Resolution 1° C.
• Output: 4 relays 250 VAC, 5 A max resistive load, free switch contact.
• Cooling fan control on three or four channels.
• Comparison of temperature for cooling fan between two different
levels (L and H).
• Working temperature of device from -40°C to 60°C.
• Construction in accordance with
• Max allowed dampness in the room 90% not condensing.
• Checking of validity of the insert data during programming phase.
• Possibility of manual relays switch through menu test relays.
• Storing of the programmed values and max temperature achieved.
• Visualisation of max temperature and the relevant channel in the
automatic mode.
• Memorisation of the max reached temperature for each channel.
• Dielectric isolation: 2.5 Kv for 60".
Perform a square hole measuring 91x91 mm in the panel board sheet.
Fasten the monitoring system trough the special hooks.

TECHNICAL FEATURES

rules.
ASSEMBLY
9
ENGLISH
rules.