• The indicators
• The indicator
flash.
• The display shows the current
setting: e.g.
3. Press Delay again and again to
change the setting.
4. Press the on/off button to confirm
the setting.
6.4 Use of rinse aid and multi-
tablets
When you activate the option Multitab,
the rinse aid dispenser continues to
release rinse aid. However you can
deactivate the rinse aid dispenser. In this
case the drying results may not be
satisfactory.
With the rinse aid dispenser deactivated,
the rinse aid indicator is always off.
7. OPTIONS
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid
and detergent functions. They can also
contain other cleaning or rinsing agents.
go off.
= level 4.
– The levels of rinse aid are
from 0A to 6A.
– Level 0 = no rinse aid is
released.
Desired options must be
activated every time before
you start a programme. It is
not possible to activate or
deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
How to deactivate the rinse
and
aid dispenser
The appliance must be in programme
continues to
selection mode.
1. To enter the user mode, press and
2. Press Start.
3. Press Start to change the setting.
The rinse aid indicator goes off.
4. Press the on/off button to confirm
This option deactivates the release of
salt. The salt indicator does not come on.
With the use of this option the
programme duration is prolonged to
increase the cleaning and drying results
with the use of multi-tablets.
Multitab is not a permanent option and
must be selected at every cycle.
How to activate Multitab
Press Option until the indicator
on.
7.2 TimeSaver
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
The total programme duration decreases
by approximately 50%.
hold simultaneously Delay and
Option until the indicators
and
and the display is blank.
• The indicators
go off.
• The indicator
continues to flash.
• The display shows the current
setting:
= rinse aid dispenser
activated.
= rinse aid dispenser
deactivated.
the setting.
ENGLISH
29
,
start to flash
and
comes