Nap Timer - Brandt BCR160P Manual De Instrucciones

AUTO DISPLAY CHANGE
Press and hold
display change mode.
The year, date and current time will appear in the following order.
"Year" (about 5 seconds) → "month and date" (about 5 seconds) →
"current time"
To cancel the function, press and hold
display.
DISPLAY BACKLIGHT DIMMER
In order to adapt the intensity of the display to suit the ambient room
lighting, in clock time state repeatedly press SNOOZE/SLEEP/DIM
to select the dimmer brightness from high, medium to low.
NAP TIMER
The nap timer allows you to set the buzzer to wake you after a
preset interval (up to 90 minutes) without needing to set the alarms.
1. In clock time state, repeatedly press M+/NAP to select the
desired nap time in minutes - 10>20>30>40>50>60>70>80>90.
2. When the selected nap time has elapsed, the buzzer will sound
for 30 minutes and then shut off automatically.
• To stop the buzzer, press
To cancel the function, repeatedly press M+/NAP until "OFF"
appears on the display.
PROJECTION
With this projection function, you can conveniently project the clock
time onto a surface e.g. walls.
• To focus the projected time, turn the projector wheel.
• To change the projection slightly to a different angle, rotate the
projector ball.
• To flip projected time 180°, press 180 FLIP.
until "ON" shows on the display to enter auto
(about 5 seconds)
.
EN-8
until "OFF" shows on the