Electrical Supply - Sinmag Europe KM-25 Manual Del Usuario

ENG

2. Electrical supply

Please connect the machine to the correct electri-
cal supply, as indicated on the
identification plate.
After the machine has been connected to the
electrical supply, first of all check the direction
of rotation of the kneading spiral and the bowl.
Seen from above, both kneading
spiral and bowl should rotate clockwise.
The arrow on the bowl indicates the
rotating direction of the bowl.
If the rotating direction is wrong, please
exchange any two of the electrical phase
cables to reverse the rotating direction.
SINMAG EUROPE BVBA
4