Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.3. How to set the pressure for the pusher:
1.
Open the back cover and electric box, you will see the PC board, see following:
2.
Press the button 1 and 2 at the same time, and you will see the PC board shows as following
photo.
3.
Press the button 1 to choose the pressure 1-4.
4.
Press the button 2 to enter the parameter of the pressure.
5.
Press button 1 to increase the pressure or button 2 to decrease the pressure.
6.
After setting the pressure, wait for 3 seconds and the PC board will exit the pressure
adjusting screen.
7.
After setting all the pressure, wait for 5 seconds and the screen will turn dark.
1
2
ENG
19
Tabla de contenido
