Sinmag Europe MANO Manual Del Usuario página 8

ENG
3.
Replace the blades of the front frame.
4. Resume the above steps for the rear frame.
NOTE: Place some kind of protection on the front frame blades to avoid any
injury.
5. Re-assemble the frame to the machine body.
6.
Close the cover again, put the tablet in place again and fix it. Fix the bagging spade
again.
8
2.
Loosen the screws fastening the frame to the machine
body, and then turn down the front frame.
1. Loosen the FIRST LEFT 4 hexagonal socket head
screws which tighten the blades.
2. Replace the blades and check that they are well positio-
ned in the rocker arm pin.
3. Re-tension the blades by tightening screw, in order that
the blades remain in the frame as a mark of tension.
4. Then loosen the FIRST RIGHT 4 hexagonal socket
head screws which tighten the blades.
5. Resume at step 2 and work your way to the center by
alternating left and right side.
SINMAG EUROPE BVBA