Faults And Troubleshooting; Disposal; Technical Data - Beem Comfort Clean Instrucciones De Manejo

9. Faults and troubleshooting

In the event of a fault during use, pull the mains plug out!
If the unit fails to operate, please check whether
the plug is plugged in.
-
other appliances with high wattage are in operation simultaneously, causing the main fuse or
-
circuit breaker to blow. First isolate the utensil from the mains. Reconnect the fuse.
If the main fuse blows, this is normally an indication of a fault. In this case; an expert
-
should check the utensil.
10.

Disposal

The following regulations may only apply for countries of the European Community.
Dispose of the packaging according to type. If you do not wish to keep the unit, dispose of it
in accordance with the environmental regulations and current provisions.
The following standard provision applies for Germany and several EC countries:
This product is not to be treated as normal domestic refuse, but instead handed over to a
collecting point for recycling electrical and electronic appliances corresponding to the
provisions applicable in your country. Your municipal authority will provide you with
information.
Several EC and non-EC countries have country-specific regulations for the disposal of old
appliances. The authority responsible for this can provide you with information.
11.

Technical Data

Model:
Type number:
Power supply:
Power consumption:
Protection class:
Protection type:
Design alterations and technical alterations reserved. Printing errors reserved.
BEEM – Elements of Lifestyle
COMFORT CLEAN
CSL-120
230 V~ 50 Hz.
120 Watt
I
IP X0
18 / 64