Technical Data; Digital Audio Output - TechniSat DiGYBOXX T4 Instrucciones De Funcionamiento

10 Technical Data

DTT tuner
RF reception:
Tuner input:
Input/Output impedance: 75 ohms
Tuner output:
Constellation:
Code rate:
Guard interval:
Transmission mode:
Active RF loop-through
Antenna feed:
Terrestrial frontend;
Transport stream demultiplexing:
Decoders:

Digital audio output:

SP/DIF output:
Analogue audio output
Left/right audio channel:
HDMI:
Low, mid and high band, including VHF I (48.25-82.25 MHz),
VHF III (177.5-227.5 MHz), and UHF (474-858 MHz)
IEC socket
IEC connector
QPSK, 16-QAM, 64-QAM
1/2, 2/3, 3/4, 5/6, 7/8
1/4, 1/8, 1/16, 1/32
2K, 8K
5 V / 0.03 A
(short-circuit resistant, switchable)
Compliant according to EN 300 744 (DVB framing structure,
channel coding and modulation for DTT)
Meets Nordig requirements
100 Mbit/s 1394 data output (maximum)
48 general-purpose SI/PSI filters
MPEG4/AVC video decoder high profile level 4.1
MPEG2 video decoder MP@HL 4:3 and 16:9 in PAL,
letterbox and pan & scan.
MPEG1 & 2 audio decoder layer I and II with support for all
standardised bitrates and normal sampling frequencies
(32, 44.1 and 48 kHz). Supports Dolby Digital and MPEG2
layer III as an option (under licence).
Electrical, RCA jack
RCA jacks (white, red)
HDMI v1.2
Support for YCC4:4:4/4:2:2 and RGB colour spaces
Resolution: 1080i, 720p, 576p, 576i
HDCP
Stereo PCM audio
45