Help Key; Auto Addressing Procedure - FireClass FC501 Guía Rápida De Instalación

+
At the first start-up the panel will prompt for the
User Interface language, press the cursor keys to
select the Language and then press ENTER.
Later:
Ø press the 1 key to enter in PROGRAMMING mode.
Ø Enter the Installer PIN (00000) at default, each digit
*
will be masked by
9. Select option 8: SYSTEM; LANGUAGE: the system
language selection page.
10. Press Right key to select the next language.
11. Press Left key to select the previous language.
12. Press ENTER Key accepts the selection.
FC501 panel
Detector:
Iloop=073 mA (400ma MAX)
Not addressed dev.> ENT to AUTO-ADDRESS
AUTO ADDRESSING
AUTO ADDRESSING
Found: 018 detectors,
ENT to DEVICE MAPPING,
DEVICE MAPPING
Evt time
016 10:15:33
017 10:17:19
DEVICE MAPPING
Evt time
001>10:15:33 PH L1:---< enter the add.
002 10:17:19
DEVICE MAPPING
Evt time
--- unique RIM
--- unique LPAV L2:---
DEVICE MAPPING
Evt time
--->*active*LPSB L3:---<enter the add.
--- --:--:--LPSB L3:---
Notes:
"Unique", in the time field, indicates that it is the only device of it's type on the loop.
For example if only one FC410DDM module is used in the system, it is tagged as "Unique". so it is not
necessary to activate it , the installer knows where it is.
"Active", in the time field, indicates that the relevant device is active, it is applicable ONLY to the output
device type like sounders, beacons, SNM modules, etc.,
When the installer, scanning the list of previously auto-addressed devices, reaches an output-only device
type, this device becomes active (a sounder starts do sound, a beacon starts to flash, an output module
illuminates its LED) until a new device is selected or the permanent address is entered. In this way it will be
possible to locate where the device is.
Figure 6 Autoaddressing procedure
(asterisk).
Lev.3: Program
50 Modules: 44
ESC
RUNNING
PLEASE WAIT
ESC to exit
ESC
END
004 modules
ESC to exit
ESC
RUNNING 0=stop
type add counter 017
PH L1:---
PH L1:---
0
ESC
DEVICE MAPPING
STOPPED 1=run
Evt
type add done:000/022
001>10:15:33 PH L1:089< ENT to config.
002 10:17:19 PH L1:---
PH L1:---
DEVICE MAPPING
STOPPED 1=run
Evt
type add done:017/022
L1:---< enter the add. --->unique RIM
--- unique LPAV L2:---
STOPPED 1=run DEVICE MAPPING
type add done:020/022 Evt
--->--:--:--LPSB L3:005<ENT to config.
--- --:--:--LPSB L3:---
n HELP key
To explain the information on the LCD display in the dif-
ferent pages, a embedded help feature is present on
the panel LCD display.
For each User Interface page active, when the help key
is pressed the full text in memory will be scrolled, line by
line, in the window of Help page.
A dedicated text will be present in every page of User in-
terface.
n Auto addressing procedure
For auto-addressing is intended a sequence of opera-
tion that allow to the installer to make all the devices ac-
cessible by the panel without executing any previous
configuration action on the devices , during their instal-
lation phase (device acquire phase).
EXIT
FAULT PAGE
(not addressable devices)
EXIT
FAULT PAGE
(not addressable devices)
PANEL IS READY TO WORK
AT THIS TIME
(with the default basic programming)
EXIT
MAIN PAGE
EXIT
MAIN PAGE
STOPPED 1=run
time type add done:001/022
STOPPED 1=run
time type add done:018/022
L1:015< ENT to config.
STOPPED 1=run
time type add done:021/022
ENGLISH
?
MS: Det 089 lev.3 :PROGRAM
WORKING MODE Master panel
[First flo ]
MS: Det 089 lev.3 :PROGRAM
MS: Det 089 lev.3 :PROGRAM
^ DEVICE NAME Master panel
ASSIGNED ZONE Master panel
[First flo ]
MS: Det 089 lev.3 :PROGRAM
^
DEVICE NAME Master panel
[First flo ]
^
MS: Det 015 lev.3 :PROGRAM
TRIGGER ZONE EVENT
[First flo ]
MS: MS: Det 015 Det 089 lev.3 :PROGRAM lev.3 :PROGRAM
^
TRIGGER ZONE#1 Master panel
DEVICE NAME Master panel
[First flo ]
MS: MS: Det 015 Det 089 lev.3 :PROGRAM lev.3 :PROGRAM
^
DEVICE NAME Master panel
TRIGGER ZONE#1 Master panel
[First flo ]
MS: Det 015 lev.3 :PROGRAM
^
DEVICE NAME Master panel
[First flo ]
^
MS: Det 005 lev.3 :PROGRAM
TRIGGER ZONE EVENT
[First flo ]
MS: Det 005 lev.3 :PROGRAM
MS: Det 089 lev.3 :PROGRAM
^
TRIGGER ZONE#1 DEVICE NAME Master panel Master panel
[First flo ]
MS: Det 089 lev.3 :PROGRAM
MS: Det 005 lev.3 :PROGRAM
^
DEVICE NAME Master panel
TRIGGER ZONE#1 Master panel
[First flo ]
MS: Det 005 lev.3 :PROGRAM
^
DEVICE NAME Master panel
[First flo ]
^
Master panel
Master panel
17