CFC 49120
1. Open the packing carton and remove the fan.
2. Mark the center of the joist. Pass the power cables through the holes in the rack. Attach it to the ceiling
joist using flat washers, spring washers and fixing screws.
3. Connect the power cables to the terminal block. Make sure that the connections are well made and that
no piece of wire protrudes from the connection blocks. This product must be grounded - if no ground wire
is available, consult an electrician.
1. Ceiling
2. Clamping washers
3. Clamping hook
4. Support
5. Gusset fastening screws
6. Ground cable
7. Elastic washers
8. Washers
9. Screws for wood
10. Cable terminals
11. Hollow rod
12. Fixing screw
13. Flat washers
14. Upper shield
15. Aspa
16. Motor
11
