Solar'r - VENTILAIRSEC VMI PULSE’R Prestige 2 Manual De Uso

5.1.3 maintenance:
The correct functioning of the Hydro'R system depends on the functioning of your central heating
system and your water-supply network. During the annual maintenance of your heating system (boiler,
heat pump, etc.), you must inform your installer that you use a Hydro'R system. The installer must in
particular inspect the water filter installed upstream of your system. Your installer must therefore
place a "Hydro'R" logo on your heating system.
If your heating system supplies water hotter than 60°C and the water supply temperature does not
depend on the outside temperature, you will need to adjust the hot water temperature in mid-season
and lower it to less than 55°C, as shown in your boiler instruction manual. This will ensure optimal
functioning of the Hydro'R system and reduce your energy consumption.
Hydro'R care:
The Hydro'R system's warranty is only valid if a maintenance contract has been drawn up between the
user and the installer.
FAQ:
If there is no Hydro'R logo on your remote control, contact your installer.

If your Hydro'R system is leaking, close the system's water inlet valves and contact your

installer.
5.2

Solar'R

5.2.1 Presentation of the screens
Users who have the Solar'R option will see the following screens:
Main screen
Please note that the presentation of
these
Certain parameters may be different
depending on the settings and the
indoor and outdoor environment.
Solar'R screen
screens is non-contractual.
45