Using The Remote Control; Commissioning; Checks Prior To Use - VENTILAIRSEC VMI PULSE’R Prestige 2 Manual De Uso

4 Using the remote control

Operations that can be done by the user.
Before using the appliance, make sure you have read part 1 General Information.
4.1

Commissioning

4.1.1

Checks prior to use

Installing the batteries in the remote control (See 5.2 Batteries)
Make sure the batteries are installed the right way round as shown in the battery compartment on
the back of the remote control.
 WARNING: the VMI® unit must be electrically connected to use the remote control.
4.1.2 Location of the remote control
- The remote control must not be installed more than 50 m away from the VMI® unit
- It must be fixed on a horizontal support
- Preferably close to a heating thermostat if the premises are equipped with one
- Do not install it close to a hot or cold source
- Some obstacles may reduce the maximum range of the radio communication (walls, metal
objects, floors, etc.)
4.1.3 Connecting the remote control
To pair the remote control with the VMI® unit:
1- turn on the remote control by pressing one of the keys,
2- power up the VMI® unit,
3- within 30 seconds, when the remote control asks you to pair,
press
If the connection fails, press
Tip: move closer to the VMI unit if you have problems connecting
.
to start the procedure again.
36