Cleaning And Care - Clatronic HAS 2880 Instrucciones De Servicio

GB
1. Fully unwind the mains cable.
2. Attach a nozzle as required. Please ensure that the indentation inside the at-
tachment is positioned exactly above the locking device of the release button
and then locks into place.
• Round brush:
• Shaping nozzle:
Volume finger:
•
• Diffuser:
• Curling Tongs:
3. In order to remove a nozzle, please press the release button above the multip-
le contact switch and then pull the attachment forward to remove it.
4. Insert the plug in a duly installed 230V/50Hz socket.
5. Set the desired heating level using the multiple-contact switch:
Position 0:
Position 1:
Position 2:
6. Dry your hair with a towel and then curl it evenly, e.g. on the round brush, or
shape your hair with the device switched on to create the hairstyle you desire.
7. Carefully unwind the rolled-up strands of hair again.
8. Switch off the appliance after use and pull out the plug. Leave it cool for a few
minutes before putting it away.
• Switch off the appliance before cleaning/maintenance and pull out the plug!
• Clean the air intake opening every now and then with a fi ne brush.
• Clean the casing with a soft, dry cloth – without any additional cleaning
agents.
• The round brush can be cleaned with a suitable object (comb or brush).
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
24
Initial and General Use
Dries hair in curls
Dries specific hair locks
Makes hair more voluminous
Dries perfectly curled hair
Revives the shape of curls
Off
medium temperature for gentle drying and shaping
high temperature for rapid drying

Cleaning and care