Trevi HMP 1245 BT Manual De Usuario página 16

ENGLISH ITALIANO
only for the first connection with the Mobile phone. The HMP 1245 BT can
be connected with two mobile phones simultaneously.
1.
Keep the HMP 1245 BT within 1 meter range of a Bluetooth®-ready
Mobile phone.
2.
Press and hold the Power/Play button for about 5s, the indicator light
will flashes red and blue intermittently, the device is now in pairing mode.
3.
Find the Bluetooth® setting of your Mobile phone and start the search
for Bluetooth® devices. (For further details, please read the operating
instructions of your Mobile phone).
4.
From the list of devices found, select the "HMP 1245 BT" or "SH1".
5.
If required, enter the PIN code "0000" and confirm the entry. Once the
pairing process was successful, the HMP 1245 BT will connect to Mobile
phone automatically then switch to standby mode, the indicator will flash
blue every 5 seconds.
6. If you want to pair two Bluetooth devices, please
6.1 Firstly, pair HMP 1245 BT with one Bluetooth device
6.2 Switch off HMP 1245 BT, and switch on again
6.3 Pair and connect to the other Bluetooth device
6.4 Switch off HMP 1245 BT, and switch on again, HMP 1245 BT will connect
with the two devices automatically.
Note:
- If pairing is not completed within 2 minutes, the headset will turn off. If this
happens, please repeat the pairing steps.
- The HMP 1245 BT supports Multi-connection that allows for the simultaneous
use of the HMP 1245 BT with two mobile phones. After paring successfully
with 2 mobile phones, switch off the headset and switch on again, the headset
will connect to both 2 mobile phones automatically. Otherwise, you can connect
the headset on the cellphone manually.
07. Turning headset on /off
HMP 1245 BT HMP 1245 BT