Serial Numbers - Peg-Perego unico Instrucciones De Uso

_ WARNING This product is not
suitable for running or skating.
SEAT
_ The Unico SEAT was designed to be
used in combination with the Unico
chassis.
_ WARNING: Always use the
restraint system. Always use the
five-point safety harness.
Always lock the waist strap with the
crotch strap.
_ The front bar has not been
designed to support the child's
weight; the front bar has not been
designed to lift the seat with the
child's weight. The front bar does
not replace the seat belt.
_ WARNING: do not use the rain
canopy (if present) in interiors and
check the child is not too hot; do
not leave near sources of heat and
keep away from cigarettes. The
rain canopy must not be used on a
stroller without a hood or parasol it
can attach to. Use the rain canopy
only under adult supervision. Check
the rain canopy does not interfere
with any moving mechanism in the
chassis or stroller. Remove the rain
canopy before folding the chassis or
stroller.
The images referring to the textile details may
differ from the collection purchased.
For more information, consult our website:
www.pegperego.com
INSTRUCTIONS
UNICO CHASSIS
1 OPENING: Before opening the frame, if present, remove
(without using blades) all die-cut cardboard.
WARNING:
_ DO NOT PULL OR FORCE THE FASTENER BEYOND ITS
LIMIT.
_ DO NOT USE THE FASTENER AS A HANDLE BAR FOR
TRANSPORT OR TO CARRY WEIGHTS.
DO NOT HANG BAGS OR OTHER ACCESSORIES ON
THIS ELEMENT.
Press the side fastener downwards, grip the upper ends
of the handle bar and rotate them towards you until the
chassis has opened completely (fig_a). Opened chassis
(fig_b). The chassis is opened correctly when you hear
a click, which corresponds to the handle bar frame
attaching - please look at the picture.
2 FITTING THE WHEELS: slot the rear wheel crosspiece
onto the uprights (fig_a), ensuring that it is facing the
right way, then attach the rear wheels until they click
into place (fig_b) . To assemble the front wheels, fit them
into the slots until they lock into place (fig_c).
3 ATTACHING THE MAIN HANDLE: if the handle tube faces
upwards, align it with the stroller (Fig_a).
Fasten the handle to the frame as shown in the figure
(Fig_b).
To complete the operation, press the two side buttons
on the handle (Fig_c) to ensure the handle pushes in all
the way, until it clicks into place (Fig_d).
4 BASKET: fastening the front part of the basket.
Fasten the basket eyelets to the buttons on each side of
the frame (fig_1).
To complete the basket attachment procedure for the
front part, you are required to insert the supplied tie
(fig_2) as follows:
position it between the basket and buttons, as shown
(fig_3) and use your finger to push downwards, so as to
complete the attachment procedure (fig_(fig_4).
Repeat the same procedure for the other side of the
basket.
5 Fastening the rear part of the basket.
Fasten the upper basket eyelet to the button on each
side of the frame (Fig_5).
Fasten the basket's two lower eyelets to the two buttons
on the rear bar of the frame (Fig_6).
6 FIXED OR SWIVELLING FRONT WHEELS: for fixed wheels,
lift the levers (fig_a); for swivelling wheels, lower the
levers (fig_b). We recommend using fixed wheels on
uneven terrain.
7 BRAKE: Press the lever down to apply the brake on the
chassis and lift it to release the brake.
ADJUSTABLE HANDLEBAR: To adjust the height of the
handlebar, press both of the side buttons at the same
time (fig_a) and swing it into the desired position
(fig_b), then release the buttons.
8 FOLDING: the chassis can be closed without the seat or
with the seat facing the world.
To fold the stroller, it is best to set the front wheels to
their fixed position and close the hood (if fitted). Place
the handle as shown in the figure (fig_a).
Rotate the safety lever to the left (fig_b) and pull the
frame's internal handle towards you (fig_c). Lift the
handle until the frame is completely folded (fig_d).
9 To fold correctly, make sure the side hook is engaged
(fig_a). When folded, the chassis will stand upright
(fig_b).
TRANSPORT: the stroller can be conveniently carried
(with the front wheels in fixed position) using the central
handle bar (fig_c).
10 All the wheels can be removed to reduce dimensions
further. To remove the back wheels: pull the lever
downwards and remove the wheel as illustrated (fig_a).
To remove the front wheels: press the tab as shown and
remove the wheels (fig_b).
T-MATIC SYSTEM
11 T-Matic System is the quick, practical system that allows
you to attach to the Unico Chassis:
- Unico Seat
- PegPerego Car Seat (through Primo Viaggio LINKS
adapters).
Position them on the T-matic System and press on the
product with both hands until they lock into place.
Check that the child transport element is properly
attached.

SERIAL NUMBERS

12 Unico Chassis, has the information on the product's
production date on the lower part of the frame.
_ Product name, production date and serial number of
the chassis. This information is essential in the event of a
claim.
- 23 -