Layout And Items Supplied; Proper Use; Technical Data - EINHELL TC-PO 1100/2 E Manual De Instrucciones

result in loss of control or recoil.
e) Do not use chain saw blades or toothed
saw blades. These plug-in tools often cause
recoil or loss of control of the electric tool.
Special safety instructions for sandpapering:
a) Do not use oversized sandpaper; follow
the manufacturer's instructions on the
size of the sandpaper. Sandpaper that
projects beyond the sanding disk may cause
injuries, result in the sandpaper becoming
jammed or torn, or produce kick-back.
Special safety instructions for polishing:
a) Make sure there are no loose parts, in
particular fastening ties, on the polishing
bonnet. Roll up or shorten the fastening
ties. Loose, rotating ties may catch your fi n-
gers or get jammed in the workpiece.
Do not lose these safety instructions.

2. Layout and items supplied

2.1 Layout (Fig. 1)
1. Spindle lock
2. Front grip
3. ON/OFF switch
4. Speed control
5. Rear grip
6. Power cord
7. Polishing / sanding disk
8. Speed indicator
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Anl_SA_TC_PO_1100_2_E_SPK8.indb 20 Anl_SA_TC_PO_1100_2_E_SPK8.indb 20
GB
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
2 Additional handle
3 Polishing / sanding disk
4 Foamed plastic attachment
5 Synthetic polishing attachment
6 Sanding attachment K = 60
7 Sanding attachment K = 80
8 Sanding attachment K = 120
9 Allen key 8 mm
10 Screw M10x20 mm (2x)
•
Original operating instructions
•
Safety instructions

3. Proper use

The machine is designed for polishing coated
surfaces and for sanding wood, iron, plastic and
similar materials using the appropriate abrasive
paper.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

See warranty card of your country.
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
- 20 -
21.12.2017 08:47:19 21.12.2017 08:47:19