Assembly And Installation - Haier HPRD12XC7 Manual Del Usuario

English
Assembly and Installation
Assembly Instruction
A. Connect exhaust hose to the back of the
unit. Extend hose to desired
length and connect with window kit.
USING EXHAUST DUCT SET
1. Insert ends of Exhaust hose into air outlet nozzle and Exhaust duct "A" by
twisting until it stops.
2. Fix the Exhaust duct "A" to the exhaust outlet on the rear of the unit.
This is achieved by sliding the appropriate connector downward over the exhaust outlet ensuring
that the lugs on the outlet are engaged with the
grooves on the connector.
3. The exhaust hose is snap-fit to the unit. To take it off, turn it clockwise and remove.
Note: Air outlet hose should be mounted at right side (see fig. 1)
4. Extend the Exhaust hose and close the Window as far as possible, trapping the air outlet nozzle.
B. Repeat same steps for the air intake hose.
USING WINDOW PANEL KIT
1. Air Inlet Hose - 1 set
2. Air Outlet Hose - 1 set
3. Window Exhaust Adapter - 2 pieces
4. Window/Patio Door Slider Kit -
1 set Window Kit Installation
6
Indoor