Technical Data; Noise And Vibration - REICH HBS 1401 Instrucciones De Uso

6
dear Customer,
Thank you for buying a Karl M. Reich Verbindungstechnik
GmbH power tool.
Should you have any questions, vagueness or second
thoughts about our products, we recommend you to
contact our experts in Sales and Service Departments,
who will advise you and help you find the right answers
to the set questions. Please, call us on the telephone
number +49 (0) 7022 / 71-0.
Karl M. Reich Verbindungstechnik Gmbh
Kißlingstr. 1, D-72622 Nürtingen.
1 SUPPLIED WITH
1 belt sander
1 dust bag
1 sanding belt K80
1 instructions handbook with exploded drawing,
1 safety instructions
1 transport case
NOTE: make sure that the power tool and accessories
in the package are not damaged
NOTE: read these operative instructions carefully
before attempting to operate the tool
2 TECHNICAL SPECIFICATIoNS
2.1

TECHNICAL DATA

MOdEl
Voltage (V~)
Current (A)
Rated power (W))
No load speed (U/Min-1)
Belt dimension (mm)
Sanding surface (mm)
Weight (kg)
Vibration level (m/s2)
Sound pressure level dB(A)
Noise level dB(A)
Protection class
2.2

NoISE AND VIBRATIoN

Data on noise and vibration are stated in the table. The
measurement of noise and vibration was performed
in compliance with current standards EN 50 144.
Measurements by A-valuation state that noise level
during work exceeds 85dB and sound pressure level
exceeds 70dB, therefore it is necessary to use
ear protection.
2.3
This tool is intended for dry sanding with high removal
performance of wood, plastic, metal filler and painted
surfaces.
2.4
Do not sand material containing asbestos.
3
4
The following symbols are used throughout this
manual. Before read it they must be known.
hbS 1401
230-240 110
9,2A 17A
650 W
320
75 x 530
75 x 120
3,4
< 2,5
91
5
99
II
place!
but immediately disconnect the plug.
• Always direct the cord to the rear away from the
USE oF THE TooL
INAPPRoPRIATE USE oF THE TooL
DESCRIPTIoN oF FIGURES (FIG. 1)
1 oN/oFF switch
2 lock-on button
3 sanding belt
4 belt adjusting knob,
5 front handle
6 dust outlet roller
7 clamping lever
8 dust bag
EXPLANATIoN oF SYMBoLS
You must read safety instructions and general
safety instructions.
Warning: Risk of personal injuries and damages
to objects.
Warning: Danger of electric shock.
Green point – ecological waste disposal
Double isolation of the tool.
Environment safe
ANLEITUNG FÜR DIE SICHERE ARBEIT
Before you start working, read the enclosed
operating instructions and keep then in a suitable
Always keep the cord away from moving parts
of the tool.
Never use the tool when cord is damaged or cut
through while working, do not touch the cord,