Taurus VERONA LEGEND Manual De Instrucciones página 6

- When the water stops flowing, empty the jug,
clean the permanent filter (C) and the funnel (B)
- The machine is ready to make coffee.
- If you would like to stop the machine, press
ON/OFFand the machine will stop.
TO MAKE COFFEE DIRECTLY, WITHOUT
PROGRAMMING
- Fill the tank (D) with cold water according to the
Water Filling Section.
- Add ground coffee according to the Coffee
Filling section.
- Place the jar on the hotplate.
- Connect to the mains. It will be displayed on
the screen 12:00.
- Press ON/OFF button once, the red indicator is
illuminated.
- The machine enter in making coffee mode and
coffee will start to come out in a few seconds.
- The jug (F) can be removed while the coffee
is being made. The anti-drip system prevents
the coffee from driping when the jug is not in
position. However, time can not exceed 30
seconds, otherwise the coffee may overflow
from the edge of funnel.
- When you finish making coffee, you can stop
the machine.
- If you would like to stop the machine, press
ON/OFFand the machine will stop.
- If not, the coffeemaker will automatically switch
to Keep Warm and after 35 minutes, the coffee
machine will switch off automatically.
TO MAKE PROGRAMMING COFFEE
- Set the clock and Schedule automatic start-up.
- First you have to set the clock.
- Press the PROG button.
- CLOCK appears on the LCD screen. Press the
HOUR key and the MIN key to determine the
current time, between 0:00 and 23:59.
- Press the PROG button again.
- TIMERappears in the display, press the HOUR
key and the MIN key to set the automatic start
time, between 0:00 and 23:59.
- Press the PROG button a third time,and the
blue lamp on,the machine is in program mode.
When reservation time was arrived,the blue
lamp off and the red lamp on,the machine is
enter making coffee mode,and will shut off
after 35 minutes.
- Press the PROG button the fouth time,the pro-
gram mode will be canceled and return to wait.
- WARNING: Do not leave the coffee machine
unattended while making coffee.
ONCE THE APPLIANCE IS FINISHED,
- -Stop the appliance
- You can press ON/OFF to stop, or you can just
leave it and it will turn off automatically after 35
minutes
- -Unplug the appliance from the main
- -Clean the device
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
- To clean the permanent filter, empty it and
rinse it with running water
- The following pieces may be washed in a dish-
washer (using a soft cleaning program):
- Jug
- Then dry all parts before its assembly and
storage.
HOW TO DEAL WITH LIME SCALE
INCRUSTATIONS:
- For the appliance to work correctly it should be
kept free of limescale or magnesium incrusta-
tions caused by the use of hard water.
- A specific anti-lime scale product should be
used on this kind of product.