Cleaning And Maintenance; Important Notice - KIKKA BOO 4IN1 Instrucciones De Uso

NOTICE:Attention: When you install shoulder belt and harness yoke, do not twist the strap. Attention: When you install shoulder belt and strap, you must
make belts pass the harness shaft.
6. GROUP 2+3 INSTALLATION AND USING METHOD
ATTENTION:
1. There is only one level for Group II+III and it is first level.
2. Before using Group II+III, please remove the 5-point safety belt and cushion.
3. Pull the belt in the buckle tightly to make sure buckle in the right position.
4. Universal installation and semi-universal installation are equipped with 3-point belt which is certified by GB1 4166 or ECE R16.
5. Semi-universal installation is equipped with ISOFIX which is certified by GB14166 or ECE R16.
6.1. UNIVERSAL 2+3 (15-36kg): 3-POINT BELT
Step 1: As shown in figure 1, adjust the baby car seat to level 1.
Step 2: As shown in figure 2, return ISOFIX connector, then put baby car seat to the right place.
Step 3: As shown in figure 3, have your child sit on the seat and adjust headrest to the comfortable position. Then make the oblique belt through the guiding
hook for Group II and Ill, horizontal belt through the harness guider and pass through the guiding hole. Then, insert car belt tongue to car buckle with click
sound. Finally, make sure the lap belt can restrict the position of pelvis.
6.2. SEMI-UNIVERSAL 2+3 (15-36kg): ISOFIX + 3-POINT BELT
Step 1: As shown in figure 1, adjust the car seat to level 1 before installation.
Step 2: As shown in figure 2, rotate ISOFIX connector outward, if you want to return the connector, you can rotate it back.
Step 3: As shown in figure 3, before inserting the two ISOFIX connectors firmly into the ISOFIX fixed point in the car seat, ISOFIX indication window will show
red sign. Then, insert the two ISOFIX connectors firmly into the ISOFIX fixed point in the car seat with a clicking noise on both side. In the meantime, ISOFIX
indication window will become green. In order to release ISOFIX connectors, push the white button and pull the ISOFIX releasing button, the indication
window will become red.
Step 4: As shown in figure 4, have your child sit on the seat and adjust headrest to the comfortable position. Then make the oblique belt through the guiding
hook for Group II and Ill, horizontal belt through the harness guider and pass through the guiding hole. Then, insert car belt tongue to car buckle with click
sound. Finally, make sure the lap belt can restrict the position of pelvis.
7. REMOVING THE COVER
7.1. REMOVING THE COVER OF BODY
As shown in picture, remove the cover according to the order of I, 2, 3, 4, 5.
ATTENTION: In the circle 2, take the cover down from the four plastic hooks in the buttom of car seat. When you refit the cover, you also should fix the cover
by four plastic hooks.
2. REMOVING THE COVER OF HEADREST
Step 1: As shown in figure 1, open the snap button in the headrest.
Step 2: As shown in figure 2, separate the elastic with the headrest (see point 2). According to point 3, separate elastic with the frame. Then, remove the
cover as shown in Arrow 4.
ATTENTION: When you are ready to refit, make the steps in the opposite order.

8. CLEANING AND MAINTENANCE

• Regularly check all important parts for damage. Make sure that the mechanical components in particular are all in perfect working order. If there is damage
about your child safety seat in the event of an accident, in this case the safety seat must be replaced.
• Store the child safety seat in a safe, dry place when it will not be used for an extended period of time.
• Brush away loose debris using a soft bristled brush to clean the safety belt and plastic components, and then ventilate or dry them.
If food or beverage drips on your seat belt, thoroughly rinse it using warm water and then ventilate or dry it.
• Remove and wash the cover see the instructions of cleaning.
• If wash the cover in the fist time, the cover might fade a little bit, It is a normal phenomenon.
9. WARRANTY
KikkaBoo provide a 1-year warranty against manufacturing or spare parts defects. The warranty period is effective from the day of purchase.

10. IMPORTANT NOTICE

The dealer has the responsibility to inform thе commodity selling date. Please show this instruction manual in case of any damage of the commodity. Please
take care of this manual for instant contact with the manufacturer.
ENGLISH